Startseite › Forums › English › General Discussions regarding BT747

How to set iBlue 747 ProS to 5 Hz?

Bild von AlexDiomidov
Sa, 08/06/2011 - 18:05 – AlexDiomidov

I bought a iBlue 747 ProS, but to set the mode to 5 Hz mogub not all the time is displayed 30 seconds. Already don `t know what to do, all other settings are correct accents. How to set for 5 seconds?

‹ Holux GPSport 260 Serial sniffing results Holux M1200e ›
Sa, 08/06/2011 - 19:53 – mdeweerd
Bild von mdeweerd

Hi There are two settings: 1)

Hi

There are two settings:

1) Determining the position @5Hz;

2) Logging the position @5Hz.

So you need to set to 'Fix every 200ms' and 'Log every 0.2 seconds' or use a distance or speed logging condition that is small enough for your interest.

Sa, 08/06/2011 - 20:21 – AlexDiomidov
Bild von AlexDiomidov

Can you send some

Can you send some screenshots?

Sa, 08/06/2011 - 21:06 – mdeweerd
Bild von mdeweerd

Hi I am not near to a logger

Hi

I am not near to a logger right now, but you can have a look at the screenshot here:

http://www.bt747.org/book/device-settings-panel

In stead of 500 ms you write 200 and for Log every .. seconds you put 0.2 and then click set.

Sa, 08/06/2011 - 23:41 – AlexDiomidov
Bild von AlexDiomidov

In fact of the matter, I can

In fact of the matter, I can not change the 30 seconds when you disconnect from the program, setting up a 5 or 0.2 seconds, cleared completely, and is presented again for 30 seconds

Fr, 08/19/2011 - 02:11 – GlennPowers
Bild von GlennPowers

I am having the same problem

I am having the same problem with an i-Blue 821E. Everytime I power cycle it, it reverts to "Time 30 seconds" in "Log by..." I was able to enable "Distance 1.0 m" and it seems to be persisting. I contacted the vendor (Semsons). They said BT747 was "too old" and said to use the manufacturer's Windows-only software. I'm tried both the stable and dev versions of BT747.

I'd really like to get this to work.

thanks,
glenn